Dense fog, cold day conditions continue in Punjab, Haryana; max temperatures remain below normal: IMD Chandigarh

Chandigarh : Maximum temperatures across Punjab, Haryana and Chandigarh remained significantly below normal on Thursday, while dense fog and cold day conditions prevailed in several districts, as per the latest report issued by the India Meteorological Department (IMD), Meteorological Centre, Chandigarh.

In Punjab, the average maximum temperature recorded a marginal rise of 0.1ยฐC compared to the previous day. However, temperatures continued to remain markedly below normal by 5.5ยฐC across the state. The highest maximum temperature of 16.3ยฐC was recorded at Thein Dam (AWS). Chandigarh city recorded a maximum of 16.1ยฐC, while Amritsar remained cold at 10.4ยฐC, Bathinda at 9.8ยฐC, and Ludhiana at 12.0ยฐC. No rainfall was reported in the state during the past 24 hours.

In Haryana, the average maximum temperature increased by 0.3ยฐC, but remained appreciably below normal by 3.8ยฐC. The highest maximum temperature of 17.3ยฐC was recorded at Gurgaon (AWS). Chandigarh also recorded 16.1ยฐC, while Hisar registered 13.1ยฐC, Karnal 12.4ยฐC, Sirsa 12.0ยฐC, and Ambala 11.6ยฐC. The state reported no rainfall during the same period.

According to IMD’s district-wise weather warnings, dense to very dense fog conditions were observed at isolated places across Punjab and Haryana on January 8, with cold wave/cold day conditions affecting parts of both states. Similar conditions are likely to persist over the next few days, with varying warning levels ranging from Be Updated to Be Prepared in several districts.

IMD Chandigarh has advised residents to remain cautious during morning and night hours due to reduced visibility and prevailing cold conditions.

According to IMD, a ‘cold day’ is defined as a day when the maximum temperature is between 4.5 and 6.4 degrees below the seasonal norm. If temperatures fall 6.5 degrees below the seasonal norm, it is classified as a severe cold day. (ANI)

LEAVE A REPLY

Please enter your comment!
Please enter your name here